Vol. 3 (2022): Proceedings of the 1st SENARA 2022
Articles
Washbasin Design with DFMA Approach for Covid-19 Prevention: Desain Wastafel dengan Pendekatan DFMA untuk Pencegahan Covid-19
Published
July 17, 2022
Keywords
- DFMA method,
- washbasin design,
- ergonomic,
- Covid-19 prevention
How to Cite
Iswanto, Jakaria, R. B., & Putra, B. I. (2022). Washbasin Design with DFMA Approach for Covid-19 Prevention: Desain Wastafel dengan Pendekatan DFMA untuk Pencegahan Covid-19. Procedia of Social Sciences and Humanities, 3, 1103 -1106. https://doi.org/10.21070/pssh.v3i.320
Copyright (c) 2022 Iswanto, Ribangun B Jakaria, Boy Isma Putra
This work is licensed under a Creative Commons Attribution 4.0 International License.
Abstract
The Covid 19 pandemic makes the need for a washbasin in a public place to prevent the spread of the virus. However, in practice the available washbasins are still not standardized and not ergonomic. So that in this study an ergonomic washbasin design was tried using the DFMA (Design for Manufacture and Assembly) method. Because using the DFMA method aims to improve the design. Through this method, it is possible to produce products with a shorter time and the number of components that are more effective in accordance with the function but have better design quality.
References
[1] Rabi, F. A., Al Zoubi, M. S., Kasasbeh, G. A., Salameh, D. M., and Al-Nasser, A. D. SARS-CoV-2 and Coronavirus Disease 2019: What We Know So Far. Pathogens. 2020; 9 (3): 231.
[2] Sun, P., Lu, X., Xu, C., Sun, W., and Pan, B. Understanding of COVID-19 based on current evidence. Journal of Medical Virology. 2020; 92: 548–551.
[3] Singhal, T. A Review of Coronavirus Disease-2019 (COVID-19). The Indian Journal of Pediatrics. 2020; 87 (4): 281–286.
[4] Worldometers. COVID-19 Coronavirus Pandemic. 2021.
https://www.worldometers.info/coronavirus/.
[5] Ouassou, H., Kharchoufa, L., Bouhrim, M., Daoudi, N. E., Imtara, H., Bencheikh, N., Elbouzidi, A., and Bnouham, M. The Pathogenesis of Coronavirus Disease 2019 (COVID-19): Evaluation and Prevention. Journal of Immunology Research. 2020; 1–7.
[6] Organization, W. H. Water, sanitation, hygiene, and waste management for SARS-CoV-2, the virus that causes COVID-19: interim guidance. World Health Organization. 29 July 2020.
[7] Susilo, A. et al. Coronavirus Disease 2019: Tinjauan Literatur Terkini. Jurnal Penyakit Dalam Indonesia. 2020; 7(1).
[8] Syuen, W.W., Nirmal, U., Efzan, M.N.E., and Al Shalabi, A. Review on Research and Developments of Sinks for Various Applications. Current Journal of Applied Science and Technology. 2019; 35(3): 1-26.
[9] Çağan, S.C., Buldum, B.B., and Özkul, I. Design study with height adjustable washbasin. International Advanced Researches and Engineering Journal. 2018; 02(03): 282-286.
[10] Miles, B. L. Design for Assembly—A Key Element within Design for Manufacture. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 1989; 203(1): 29–38.
[11] Bariani, P.F., Berti, G.A., and Lucchetta, G. A combined DFMA and TRIZ approach to the simplification of product structure. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2004; 218(8): 1023-1027.
[12] Barbosa, G.F., and Carvalho, J. Design for Manufacturing and Assembly methodology applied to aircrafts design and manufacturing. IFAC Proceedings. 2013; 46(7): 116–121.
[13] Ngatilah, Y., Pulansari, F., Ernawati, D., Pujiastuti, C., Parwati, C.I., and Prasetyo, B. Design for Manufacture and Assembly for Product Development (Case study: Emergency Lamp). Journal of Physics: Conference Series. 2018; 953 012235.
[14] Lachiram, Suraj, E.S., and Soni, J.S. Development of Microwave Ridged Horn Antenna using DFMA Approach. International Journal of Engineering Research & Technology (IJERT). 2016; 5 (10): 12-16.
[15] Sudin M.N., Chin, N.S., Shamsudin, S.A., and Yusuff, M.A. Design Efficiency Analysis Towards Product Improvement for Eco-Friendly Using DFMA Method. The Open Mechanical Engineering Journal. 2016; 10: 173-181
[2] Sun, P., Lu, X., Xu, C., Sun, W., and Pan, B. Understanding of COVID-19 based on current evidence. Journal of Medical Virology. 2020; 92: 548–551.
[3] Singhal, T. A Review of Coronavirus Disease-2019 (COVID-19). The Indian Journal of Pediatrics. 2020; 87 (4): 281–286.
[4] Worldometers. COVID-19 Coronavirus Pandemic. 2021.
https://www.worldometers.info/coronavirus/.
[5] Ouassou, H., Kharchoufa, L., Bouhrim, M., Daoudi, N. E., Imtara, H., Bencheikh, N., Elbouzidi, A., and Bnouham, M. The Pathogenesis of Coronavirus Disease 2019 (COVID-19): Evaluation and Prevention. Journal of Immunology Research. 2020; 1–7.
[6] Organization, W. H. Water, sanitation, hygiene, and waste management for SARS-CoV-2, the virus that causes COVID-19: interim guidance. World Health Organization. 29 July 2020.
[7] Susilo, A. et al. Coronavirus Disease 2019: Tinjauan Literatur Terkini. Jurnal Penyakit Dalam Indonesia. 2020; 7(1).
[8] Syuen, W.W., Nirmal, U., Efzan, M.N.E., and Al Shalabi, A. Review on Research and Developments of Sinks for Various Applications. Current Journal of Applied Science and Technology. 2019; 35(3): 1-26.
[9] Çağan, S.C., Buldum, B.B., and Özkul, I. Design study with height adjustable washbasin. International Advanced Researches and Engineering Journal. 2018; 02(03): 282-286.
[10] Miles, B. L. Design for Assembly—A Key Element within Design for Manufacture. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering. 1989; 203(1): 29–38.
[11] Bariani, P.F., Berti, G.A., and Lucchetta, G. A combined DFMA and TRIZ approach to the simplification of product structure. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 2004; 218(8): 1023-1027.
[12] Barbosa, G.F., and Carvalho, J. Design for Manufacturing and Assembly methodology applied to aircrafts design and manufacturing. IFAC Proceedings. 2013; 46(7): 116–121.
[13] Ngatilah, Y., Pulansari, F., Ernawati, D., Pujiastuti, C., Parwati, C.I., and Prasetyo, B. Design for Manufacture and Assembly for Product Development (Case study: Emergency Lamp). Journal of Physics: Conference Series. 2018; 953 012235.
[14] Lachiram, Suraj, E.S., and Soni, J.S. Development of Microwave Ridged Horn Antenna using DFMA Approach. International Journal of Engineering Research & Technology (IJERT). 2016; 5 (10): 12-16.
[15] Sudin M.N., Chin, N.S., Shamsudin, S.A., and Yusuff, M.A. Design Efficiency Analysis Towards Product Improvement for Eco-Friendly Using DFMA Method. The Open Mechanical Engineering Journal. 2016; 10: 173-181